Hitachi Koki Canada carries an extensive line of professional grade tools and accessories for residential construction, commercial construction, tradesman and Do-It-Yourselfers. Headquartered in Atlanta, GA, with the Canadian branch located in Toronto, Canada. Hitachi Koki supplies nearly 4000 retail locations, both independent and home center, and supports over 1000 authorized service centers.
Reconditioned Hitachi tools with Full Warranty are available at great discounted prices. Contact us for pricing and availability.
DH 40MR SDS MAX Rotary Hammer - Fastest Drilling speed in its class
- 4" Core drilling capacity
- 1-9/16" Drill bit capacity in concrete
- 7.4 ft-lbs of impact energy
- 2 mode action, hammer drilling and hammer only
- Tool weight - 14.3lbs
- Constant speed with variable speed control
DH 40FR Spline Shank Rotary Hammer
- 4" Core drilling capacity
- 1-1/2" Drill bit capacity in concrete
- 5.2 ft-lbs of impact energy
- 2 mode action, hammer drilling and hammer only
- Tool weight - 17lbs
DH45MR SDS Max Rotary Hammer
- 5” Core drilling capacity
- 1-3/4” drill bit capacity
- 11.4 ft-lbs of impact energy
- 2 mode action, hammer drilling and hammer only
- Tool Weight, 17.6 lbs
DH50MR SDS MAX Rotary Hammer - True 6" Machine
- 6" Core drilling capacity
- 2" Drill bit capacity in concrete
- 14.75 ft-lbs of impact energy
- 2 mode action, hammer drilling and hammer only
- Tool weight - 22lbs
NR90AD 3-1/2” Clipped Head Framing Nailer
- Lightest in its class, only 7lbs
- Flips easily between Sequential and Contact nailing
- Tool free depth of drive adjustment
- Uses 2” - 3-1/2” Clipped Head Nails
N5008AC2 Construction Stapler, Standard Crown, 7/16”
- Lightweight at 4.4lbs, well balanced
- High capacity magazine holds 150, 1 - 2” staples
- 16 Gauge, 7/16” Crown
- Quick-clear jam release for increased efficiency
- Depth adjustment to countersink or flush drive staples
NV65AH Siding / Sheeting Nailer
Great for Framing, Decking and Hardie Board
- Lightweight, 4.6 lbs
- Drives wire and plastic sheet collated nails
- No mar nose cap protects material
- Drives 1-1/2” - 2-1/2” nails
NT50AE2 18-Gauge Brad Nailer
- Lightweight, 2.2lbs
- Selective actuation for sequential or contact nailing
- Tool less, easy to clear nose
- Uses 5/8” - 2” nails
NV 45AB2 Coil Roofing Nailer - 45mm (1 3/4")
- Heavy Duty Construction
- 5.5lbs, lightwight and well balanced
- Quick side loading magazine
- Tool-less depth of drive adjstment
- Proven design
NV83A2 Full Round Head, Coil, Wire Collation
- Lightweight 3.7kg(8.2 lbs.) for one-hand operation
- Easy top load pop-out magazine
- Tool-less depth adjustment
- Comfort rubber grip
M 12 VC Hitachi Router - (Variable speed type with fixed base)
- 11 AMP, 2- 1/4 HP motor
- Extremely low noise level-only 80db
- Electric speed control to maintain constant speed even under load
- Ergonomic design
C10FSHPS Slide Compound Saw - 10” Sliding Compound Mitre Saw with laser marker
- Laser marker for easier alignment with ink line
- Positive angle stoppers for easy adjustment of the turn
- Electronically controlled soft start and constant speed
- Poly V-belt and motor driving system for longer service life
SP18VA - 7” Sander - Polisher, Electronic Control, Variable Speed
- Powerful motor with an input of 1,250 / 120V -11A
- Soft start and constant speed control
- Two ways of changing speed: Trigger and Dial
- No-load speed 0-3, 400/min
